Amphibious Equipment
Sinoway amphibious excavator/marsh buggy is modular designed to
manoeuvre in marshy, swampy area and soft terrain, and it can also
float on water as an added safety feature. It is completely self
propelled and can virtually access all terrains, and yet requires
minimum supporting transportation and hoisting equipment. When
fitted with a long reach front, the machine offers an unparalleled
package with unmatched productivity for your investment.
Thus we have developed a complete line of swamp excavator from
0.2m3 bucket, up to 1.1m3, with optional for long reach boom
amphibious excavator.
Applications
Maintenance and cleaning of waterways,lakes, shorelines, ponds,
etc.
Erosion control and prevention.
Deepening of waterways and river deltas.
Maintenance and repair of natural environment.
Flood protection and flood maintenance works.
Landscape building and protection.
Accessing difficult strands of water/soft terrain.
Swamp and wetland construction.
Road building through wetlands.
Main Features
Equipped with Cummins Isuzu or Doosan engine with good performance
and reliability.
Proprietary multi-synchronous drive motor design. Motors are
mounted on front and rear of each pontoon.It offers superior
tracking power as compared to a single motor design.A similar
concept that is applied to a full time 4x4 gear system of a land
vehicle.
Three watertight compartments for per pontoon, hermetically sealed.
Service manholes on each pontoon for easy maintenance and field
servicing.
Heavy duty muti track chain system, laser trimmed to extreme
precision.
Hardened rollers and bushings for extended operation life.
Bolt-on sprocket system for perfect track pitch alignment.
Modular design for easy transportation.
The boom is with large cross-section, high-rigidity box-shaped
structure, through optimizing procession, to reduce the negative
intensity welding, to make the machine also suitable for heavy-load
operations. The main hinged parts are all forgings structure, which
prevent focusing the stress, at the same time, improving the
strength of high strength wear-resistance are utilized at the
boom-stick and the cylinder mounting area, which provide a better
lubrication and higher durability.
Heavy duty marsh buggy track chains are constructed with high
strength tensile steel, the bushings and pins are stronger, each
pontoon comes with two or three heavy duty track chains, track
cleats are bolted on the chain pitch welded or bolted. The hardened
track chain rollers run in pontoon channels with a strip of wear
resistant steel. The drive and idler sprockets are flame hardened
to match the hardness of the track chain rollers.
The operator cabin is supported with innovative silicone rubber
shock absorber, which minimize the shock brought by the rough
terrain and engine or hydraulic vibration and impact transmitted to
the cabin, increase the stability of cabin and improve the
operators’ sitting quality and operating comfort.
| Engine | |
| Model | Isuzu/Cummins |
| Type | Six-cylinder,water-cooled
turbocharged,mechanical injection |
| Rated power | 112KW |
| Main Technical Specification | |
| Operating weight | 40000Kg |
| Standard bucket capacity | 0.6m3 |
| Slewing speed | 13rpm |
| Stick digging force | 50.0KN |
| Bucket digging force | 64.0KN |
| Main Features | |
| Tracked pontoon structure | |
| Big torque travelling device | |
| Big circular arc structure | |
| High capacity of fuel tank | |
| Main Applications | |
| River/Beach earth moving | |
| Swamp works | |
| Dredging applications | |
| Delta works | |
| Waterway deepening | |
| Hydraulic System | |
| Main pump | KAWASAKI |
| Main valve | KAWASAKI |
| Motor | KAWASAKI |
| Hydraulic flow rate | 2x210L/min |
| Hydraulic pressure | 32MPa |
| Travelling System | |
| Travelling speed | 0~4.88km/h |
| Grade ability | 58% |
| Ground pressure | 0.013MPa |
| No. of chains | 300% |
| Dimensions | |
| Overall length | 14500mm |
| Overall width | 6100mm |
| Overall height | 3950mm |
| Ground clearance | 1192mm |
| Length of pontoon | 10200mm |
| Width of pontoon | 1760mm |
| Height of pontoon | 1700mm |
| Optional | |
| Wide bucket | |
| Operating Scope | |
| Stick length | 5200mm |
| A: Max. cutting height | 12190mm |
| B: Max. dumping height | 9800mm |
| C: Max. digging depth | 11600mm |
| D: Max. reach | 15100mm |
