Equipped with powerful Cummins engine, 35.5m main arm, 16m auxiliary arm, under the same boundary
conditions, the comprehensive lifting performance is the strongest.
The maximum speed is 35 km/h, the maximum climbing ability is 65%,
and the minimum turning radius is only 6.1 M. It is flexible and
fast.
Super power system, special cross-country tread tire, anti-skid
differential locking device, easy to cross all kinds of complex
road surface.
Lifting protection control, such as overload, roll-over and
overload, as well as the industry's unique rear axle wheel
auto-alignment control and driving safety auto-protection
technology, greatly enhance the product's active safety
performance;
Industry top configuration, professional matching optimization and
systematic evaluation test, 4000km driving, 10000 lifting tests,
effectively ensure the reliability of products.
Optimizing the matching power transmission system and equipped with
a hydraulic torque converter with locking function, the fuel
consumption of high-speed driving can be reduced by more than 20%.
Flow distribution management technology, system efficiency; gravity
drop amplitude system, without additional power, save fuel
consumption.
Full hydraulic steering and braking, hand-in-one gearbox, easy to
operate;
Humanized climbing, maintenance channels and control parts layout,
professional ergonomics simulation analysis, exquisite
human-computer interaction interface, configuration of single
machine fault diagnosis function, comfortable operation, easy to
use.
| Engine | |
| Engine make | CUMMINS |
| Type | Six-cylinder,water-cooled,turbocharged,electronic injection |
| Rated power | 194KW |
| Rated speed | 2200rpm |
| Lifting Specification | |
| Max. rated lifting capacity | 60000kg |
| Min. raged working radius | 3m |
| Slewing radius at turntable tail (at counterweight) | 4220mm |
| Max. load moment | |
| Base boom max. load moment | 2058KN•m |
| Fully extended boom load moment | 1152KN•m |
| Boom Length | |
| Base boom | 11320mm |
| Fully extended boom | 35500mm |
| Fully extended boom+jib | 51500mm |
| Lifting height | |
| Base boom | 11300mm |
| Fully extended boom | 35800mm |
| Fully extended boom+jib | 49100mm |
| Working Speed | |
| Boom raising time | 75s |
| Boom extending time | 80s |
| Max. slewing speed | 2.5 rpm |
| Outrigger beam extending/retracting time | 35/40s |
| Outrigger jack extending/retracing time | 45/35s |
| Hoist speed | |
| Main winch max. speed | 110m/min |
| Aux. winch max. speed | 110m/min |
| Outrigger span | |
| Longitudinal | 7300mm |
| Lateral(fully/half extended) | 7200/5600mm |
| Traveling Specification | |
| Max. traveling speed | 35km/h |
| Drive type | 4×2/4×4 |
| Grade ability | 65% |
| Min. turning radius | 6.1m(4×4)/10.5(4×2) |
| Noise at seated position | 80dB(A) |
| Braking distance (at 24 km/h) | 9m |
| Tyre | 26.5R25 |
| Mass Specification | |
| Operating weight | 40810kg |
| Axle load 1st | 21070kg |
| Axle load 2nd | 19740kg |
| Dimensions | |
| Overall size | 13300×3180×3889mm |
| Wheel base | 4000mm |
| Tread | 2400mm |
| Overhang(F/R) | 2000/2265mm |
| Extension(F/R) | 5000/35mm |
| Min. ground clearance | 495mm |
| Approaching/departure angle | 20°/17° |
| Jib offset angle | 0°, 15°, 30° |
| Braking system | |
| Service brake | Double-circuit full-hydraulic disc brake |
| Parking brake | Spring-loaded brake,hydraulic-released independent disc brake |
