Product highlights:
Strong lifting capacity and wide range of work
The 31m main arm and 13m auxiliary arm are the longest in the same
tonnage products and have the highest comprehensive lifting
performance.
Flexible, fast and efficient
The maximum speed is 50km/h, the maximum climbing ability is 55%,
and the minimum turning radius is only 5m, which is flexible and
flexible.
Self-positioning and self-locking abdominal assistant arm, without
auxiliary operators and equipment, can be retrieved and placed
quickly and efficiently.
Safety, reliability and ease of use
Lifting protection control, such as overload, roll-over and
overload, as well as the industry's unique rear axle wheel
auto-alignment control and driving safety auto-protection
technology, greatly enhance the product's active safety
performance; Industry top configuration, professional matching
optimization and systematic evaluation test, 11,000 km driving,
10,000 lifting tests, effectively ensure the reliability of
products.
4Economical and environmental protection, cost saving
Optimizing the matching power transmission system and equipped with
a hydraulic torque converter with locking function, the fuel
consumption of high-speed driving can be reduced by more than 20%.
Parallel hydraulic system controlled by one-way steady flow has
small flow loss, and variable amplitude system with gravity drop
does not need additional power and saves fuel consumption.
Comfortable operation and convenient use
Full hydraulic steering and braking, hand-in-one gearbox, easy to
operate; leaf spring + hydraulic cylinder composite suspension,
self-identification and staged control of rotary cushioning
technology, stable operation, comfortable operation;
Humanized climbing, maintenance channels and manipulators layout,
professional ergonomics simulation analysis, exquisite
human-computer interaction interface, configuration of single
machine fault diagnosis function, easy to use.
| Engine | |
| Make | CUMMINS |
| Rated power | 142KW |
| Rated speed | 2200rpm |
| Emission | Off-road, Eu stage IIIA |
| Drive type | 4×2, 4×4 |
| Dimension & Weight | |
| Overall length | 11703mm |
| Overall width | 2700mm |
| Overall height | 3385mm |
| Wheel base | 3700mm |
| Tread (F/R) | 2200m/2200mm |
| Overhang (F/R) | 1601mm/1867mm |
| Extension (F/R) | 4484mm/51mm |
| Total mass | 26300kg |
| Front axle load | 12696mm |
| Rear axle load | 13604mm |
| Main Technical Specification | |
| Max. Rated lifting capacity | 25t |
| Min. Rated working radius | 3m |
| Slewing radius at turntable tail | 3698mm |
| Max. Load moment | |
| Base boom | 989.8kN.m |
| Fully-extended boom | 588kN.m |
| Outrigger span | |
| Longitudinal | 6.3m |
| Lateral(fully/half extended) | 6.3/4.8m |
| Lifting height | |
| Base boom | 9.1m |
| Fully-extended boom | 30.8m |
| Fully-extended boom+jib | 37.7m |
| Boom length | |
| Base boom | 9.7m |
| Fully-extended boom | 31m |
| Fully-extended boom+jib | 39.15m |
| Jib offset angle | 0°, 15°, 30° |
| Performance Specification | |
| Max. Travel speed | 50km/h |
| Min. Turning radius | 5m(4 wheels)/8m(2 wheels) |
| Min. Ground clearance | 345mm |
| Approach angle | 22° |
| Departure angle | 19° |
| Brake distance(24km/h) | 9m |
| Max. Grade ability | 55% |
| Tire | 14.00R25 |
| Number of tires | 4 |
| Working Speed | |
| Time for boom raising | 55s |
| Time for boom extending fully | 70s |
| Max. Slewing speed | 2.0r/min |
| Outrigger extending/retracting time | |
| Outrigger beam(extending/retracting) | 35s/30s |
| Outrigger jack(extending/retracting) | 45s/35s |
| Hoisting speed(at 4th layer no load) | |
| Main winch | 130m/min |
| Auxiliary winch | 130m/min |
